Wooden & RCC Cooling Tower
There are a total of 91 models available under single cell configuration. Multi-cell configuration are provided to offer flexibility of operation and also meet increased cooling requirements. These cooling towers are supplied with treated timber construction, which is pressure treated with copper chromate arsenic. Structural design for operational load and wind pressure of 30 PSI is taken into consideration. Details provided on request for quote.
 | |
| Item |
Material of Construction |
| Structure |
Treated Timber |
| Fill |
Treated Timber /PVC |
| Fill Support |
GRP Grids / SS Grids |
| Drift Eliminator |
Treated Timber 2 Pass /PVC |
| Drift Eliminator |
Support Marine Plywood /PP |
| Structural Connector |
FRP Rings |
| Nozzle |
Polypropylene (PP) |
| Hardware's |
HDG.MS/SS |
| Nails |
Screw Shank SS |
| Fan Assembly |
Cast Aluminium Alloy /GRP Bladed |
| Fan Cylinder |
FRP |
| Gearbox |
Worm/Spiral Bevel |
| Drive Shaft |
Floating HDG.MS |
| Casing & Louvers |
Corrugated AC Sheet/Corrugated FRP Sheet |
| Electric Motor |
To Suit Country Specific |
| Cold Water Basin |
RCC (By Purchase Ser-Drawing Provided) |
|